921.16475, WPB1982513 #01B063

Repair Parts for the Craftsman model 921.16475, WPB1982513 Portable Single-Stage Oil-Bath Electric Air Compressor

NOTE! This unit uses the "130" model pump.

If ordering a new 130 Pump, you can use the Head from your original pump, as it will retro-fit onto the new Pump. This is necessary for older pumps that have two outlets in the head; the new pump Head only has one outlet in the head.

Specifications

Pump specs:

• Min RPM 700
• Max RPM 1200
• Max pressure 125 psi
• Max duty cycle 50%
• Oil capacity 18 oz.
• 130 Pump 6.0 cfm @ 90psi (2 HP motor)
• 165 Pump 10.1 cfm @ 90spi (5 HP motor)
• 39 lbs.
• Torque specs (see Schematic on "Description" tab)
• For 2-4.5 HP units, you have a 130 pump
• For 5 HP and greater they call it a 165 pump. The only difference is the crankshaft and connecting rods.
• Make sure of your pump model before ordering these parts or a new pump.
• New pump comes with felt style air filter. Old canister style not available with new pumps.
• New style pump has 1/4" FPT & 1/8" FPT outlet ports in head. (Your old head may be 1/2" and will need an adapter.)
• If replacing valve plate or purchasing short block, please order the felt style filter and screen as the new style valve plate will not hold any other filter setups.

Technical Documents

• Head bolt torque 220-200 in lbs.
• Carrier bolt torque 170-230 in lbs.
• Flywheel bolt torque 150-250 in lbs.
• Bottom oil pan torque 30-50 in lbs.
• Connecting rod torque 160-200 in lbs.

Video

This short video shows the different air filter assemblies used on the Sanborn 130 pump and the Sanborn 165 pump.