MPA1982054 #01B3B3

Old Part Numbers: 040-0352753H Pump Assy with Flywheel. Ready to bolt on. Just add Oil then install your Belt and Discharge Tube.

Old Part Numbers: 160-0129Note: item is listed with RHP (running horsepower). 1.9 RHP, 115 Volt.

Includes items 1-5, 8, 10, 11 and 12. Has ONE outlet in the head.

OEM pressure switch. 125 PSI On/ 155 PSI Off. Replace the Pressure Switch if the unit doesn't cut on or off at the designated pressure the unit is set for. If the unloader valve is leaking on the side (or underneath) of the switch AFTER the unit shuts...

For 753H pump. This overhaul kit includes items 1-5, 8, 10, 11, 12, 15, 21, 27, 29, 34 and 37.

Order (0039) Head Assy below instead.. Has ONE outlet (for large supply line).

Crankshaft for 753H. Bearings and seals not included.

Valveplate assembly (includes gaskets, items 10 & 12). Two valves are located in the head and two valves located in the valve plate (head not included). Poor performance or air leaks out of the intake filter while the unit is running? This is probably...

For 753H pump (Two required). NOTE: New Conrods do not have Insert Bearings, change in manufacturer of the Conrod. Bearings are machined into the casting of the Rod.

12" Flywheel, "A" Groove. Tapered bore is 1.104" to .917".

Complete gasket kit for pump, including crankshaft seal.